Finally half running

Central location for technical tips and information

Moderators: rztom, silverstrom

Post Reply
Message
Author
kampinguru
Posts: 84
Joined: Mon Dec 07, 2015 10:15 am
Location: Milton, Ontario

Finally half running

#1 Post by kampinguru » Wed May 24, 2017 3:13 pm

I finally got to start the RZ after the rebuild. everything is back together and It started up after about 6 or 7 kicks. Seemed to run ok but then the left side stopped running. It has spark, so not sure why it would only run on one cylinder. Any ideas? Starts up on two then lefty shuts off after about 10 seconds.

justind97
Posts: 202
Joined: Mon Aug 10, 2015 8:57 pm
Location: Ottawa, Canada

Re: Finally half running

#2 Post by justind97 » Wed May 24, 2017 4:00 pm

Fuel.

kampinguru
Posts: 84
Joined: Mon Dec 07, 2015 10:15 am
Location: Milton, Ontario

Re: Finally half running

#3 Post by kampinguru » Thu May 25, 2017 9:08 am

Perfect. Guess I will have to take the left carb apart again. Thank you very much.

justind97
Posts: 202
Joined: Mon Aug 10, 2015 8:57 pm
Location: Ottawa, Canada

Re: Finally half running

#4 Post by justind97 » Thu May 25, 2017 12:33 pm

Check to make sure that the line isn't pinched.

Are you running the petcock in the ON position or RES?

kampinguru
Posts: 84
Joined: Mon Dec 07, 2015 10:15 am
Location: Milton, Ontario

Re: Finally half running

#5 Post by kampinguru » Thu May 25, 2017 2:53 pm

I am running it in the res position.

Post Reply