Clutch stocked/hanging Help
Moderators: rztom, silverstrom
Clutch stocked/hanging Help
Hi forum
Messing with left clip-on, removed the clutchlever and wire...
Remounting wire and lever... and the clucth is hanging and there is no tension on the wire!!!...
What/how can i get the clutch released again??
Regards Stig
Messing with left clip-on, removed the clutchlever and wire...
Remounting wire and lever... and the clucth is hanging and there is no tension on the wire!!!...
What/how can i get the clutch released again??
Regards Stig
Re: Clutch stocked/hanging Help
Hi Stig, check the cable (wire) at the clutch arm end. (Under the carbs). It will often come off there when you remove the lever.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Clutch stocked/hanging Help
The cable and lever is fine...
It is like the clutch has been "over pulled" when i was dismounting the cable and the clutch has locked and wont release itself again...
The clucth arm didn´t return after tension.
Hope it makes sense... Engwish not first lagunes
It is like the clutch has been "over pulled" when i was dismounting the cable and the clutch has locked and wont release itself again...
The clucth arm didn´t return after tension.
Hope it makes sense... Engwish not first lagunes
Re: Clutch stocked/hanging Help
I'd drop the oil and pull the case. You might have broken plates.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: Clutch stocked/hanging Help
Hmm... Ok, i will report back what happend
Re: Clutch stocked/hanging Help
Completly forgot about returning with the clutch issue and solution
When removing the clip on´s, i heard a little noise... like when your dropping a 5mm nut to the floor, you didn´t see were it landed and start to wonder if you heard rigth, because the sound has nothing to do with the work your doing... Yes??
I grabbed my Haynes manual, read about the clucth adjustment, dismantling and removing the clutch, got my tool and on with it...
I ended up with doing it five times
Step by step, before deciding that there is nothing wrong with the clutch... i have done it rigth according to the book
Thinking very hard about it I remembered the litle noise i had heard and whent backwards to where it all startet and looking at the lever and cableadjuster...cable beeing ca. 1cm to long....
Was that the sound???... and extra customized cable adjuster, that i made years ago do to the long cable...FUUUUUUUUUCK ME!!!!
No further questions your Honor
The clutch is now in a god working order
When removing the clip on´s, i heard a little noise... like when your dropping a 5mm nut to the floor, you didn´t see were it landed and start to wonder if you heard rigth, because the sound has nothing to do with the work your doing... Yes??
I grabbed my Haynes manual, read about the clucth adjustment, dismantling and removing the clutch, got my tool and on with it...
I ended up with doing it five times
Step by step, before deciding that there is nothing wrong with the clutch... i have done it rigth according to the book
Thinking very hard about it I remembered the litle noise i had heard and whent backwards to where it all startet and looking at the lever and cableadjuster...cable beeing ca. 1cm to long....
Was that the sound???... and extra customized cable adjuster, that i made years ago do to the long cable...FUUUUUUUUUCK ME!!!!
No further questions your Honor
The clutch is now in a god working order
-
- Moderator
- Posts: 7038
- Joined: Wed Mar 24, 2010 2:20 am
Re: Clutch stocked/hanging Help
Lol...funny how memory fails us as times.
Re: Clutch stocked/hanging Help
Glad you got it all worked out.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine