Zeeltronic Wiring for Hybrid

General forum on troubleshooting electrical problems and modifications to electrical systems

Moderator: rztom

Post Reply
Message
Author
DRC
Posts: 36
Joined: Tue May 12, 2015 4:18 pm
Location: Oshawa, Ontario, Canada

Zeeltronic Wiring for Hybrid

#1 Post by DRC » Sat Nov 28, 2015 6:39 pm

I have a Zeeltronic PCDI-10V that Im going to use on my 350LC hybrid.

My rotor and stator is from a 1984 Canadian bike, a 33E, and is original to the bottom end I'm using.

I'm in the process of building a new wiring harness and was wondering which of the wiring diagrams on the Zeel site to use. I assume its this one - http://www.zeeltronic.com/manuals/RZ_wi ... DI-10V.pdf" onclick="window.open(this.href);return false;

I just don't want to do it twice.

I've another question that may be actually quite dumb. I'm going to use an Anti Gravity Battery and I know they don't like to be overcharged so I may use a new rectifier. Does the rectifier have to be specific to the RZ, or can I use one from a CBR250. I just happen to have a brand new one in the box and its 6 pin just like the RZ.

Electrical is the only thing I really struggle with :(

TIA

Post Reply