Zeel Curves?

[evan_calgary]

Anyone have curves to start with on the Zeel? I ordered direct for Borut and have a number of aftermarket bits on the bike. Not sure how substantially that impacts my starting point but wondering if anyone cares to share their curves...

[JonW]

Have a look at some threads Aaron did about 2-3 years back, Im sure he had some of his in there, and others chipped in as well

[evan_calgary]

Thanks Jon

[evansje1]

Just got a Zeeltronic installed in mine today. My RZ engine is stock except for chambers, Yboot, and jetting. Mark in SC help me with verifying that the pickup reference point was correct. I didn't have a degree wheel. Thanks a lot Mark. Donuts for you at the Gap next month.

I had to find top dead center and establish 2mm btdc to verify the pickup reference point is in the correct place. 2mm btdc is 19.9 degrees. The ignition programs in degrees so I programmed a flat curve of 19.9 degrees to verify the pickup. It was perfect. I have ran the pre-programmed curves today and have programmed another one I’ll try tomorrow.

https://www.youtube.com/watch?v=eMJJxHE ... e=youtu.be" onclick="window.open(this.href);return false;

[kpke]

Nice work evansje1

Now, about that very cool rack on the back of your bike.

I really think you should sell it to me.

[evansje1]

Nice work evansje1

Now, about that very cool rack on the back of your bike.

I really think you should sell it to me.

You can't afford it
I had a stock grab bar with road rash so I fab a rack from it that I could carry a quart of injector oil on.

[75RD350rider]

Excellent!