What bodywork is this?

General forum on fairings, seats, tanks, tail sections, painting and other bodywork modifications

Moderator: rztom

Post Reply
Message
Author
Custommade
Posts: 35
Joined: Wed Jun 08, 2016 7:30 am
Location: Australia VIC

What bodywork is this?

#1 Post by Custommade » Wed Jun 08, 2016 11:54 pm

Hi guys, not my first post but I've been out for a while and my old account was scraped.
Can anyone tell me what bodywork is on this RZ?
1994 TZ350???
http://froggy.se/skalmanmc/pics/sida1.JPG

User avatar
Questo vecchio rz
Posts: 1116
Joined: Sun Aug 16, 2015 5:55 pm
Location: Reconquista of California

Re: What bodywork is this?

#2 Post by Questo vecchio rz » Thu Jun 09, 2016 5:16 pm

Blast from the past there. His bike used modified early 90s TZ bodywork, with a custom fuel tank, and custom subframe. If intrested you dont need a custom tank or subframe if youd like a "similar" look, many TZ fairings can be adaptded to work.
I think I have the link to that bike, I'll post it up if i have it.
Last edited by Questo vecchio rz on Thu Jun 09, 2016 5:20 pm, edited 1 time in total.
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500

User avatar
Questo vecchio rz
Posts: 1116
Joined: Sun Aug 16, 2015 5:55 pm
Location: Reconquista of California

Re: What bodywork is this?

#3 Post by Questo vecchio rz » Thu Jun 09, 2016 5:18 pm

Heres the bike build specs. H.P claims were quite large? Ive noticed dyno #s from Europe IMO often seem a little exaggerated. http://froggy.se/skalmanmc/bike/index.htm" onclick="window.open(this.href);return false;
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500

Custommade
Posts: 35
Joined: Wed Jun 08, 2016 7:30 am
Location: Australia VIC

Re: What bodywork is this?

#4 Post by Custommade » Fri Jun 10, 2016 2:08 am

Thanks for that. Not sure why but i didn't see that page before. My guess was TZ.

Post Reply