Hi
after chasing down the parts, I have a bit of an issue fitting the New N2 radiator cover to my F2 as part of the final "transformation".
More specifically, i am struggling to see where /how the top of the radiator attaches to the frame/radiator?
On the parts list illustration pdf a bolt item 20 is shown on page 13, but there does not seem to be a corresponding bracket or tab to fix the bolt to?
ref http://rd350lc.net/RD350N2-1UA-86eng.pdf
Can anyone help? Is the F2 frame missing some "bits" compared to the N2 perhaps?
I tried to explain this problem on the "N2 radiator cover wanted" thread as well ..
viewtopic.php?f=11&t=14943" onclick="window.open(this.href);return false;
Thanks
Kjell
Rd350 Ypvs N2 radiator cover fitting details
Moderator: rztom
Rd350 Ypvs N2 radiator cover fitting details
----------------------------------
RD350 YPVS 1990
F2 converted to N2 Red/white 1986 - Figaroli pipes
RD350 YPVS 1990
F2 converted to N2 Red/white 1986 - Figaroli pipes
Re: Rd350 Ypvs N2 radiator cover fitting details
There is a tab on the frame on the naked bikes to bolt this too, it is not present on the full fairing bikes, I used the cover as a jig to weld a tab on myself. (and then I installed a larger aluminum rad that the cover won't fit over).
Re: Rd350 Ypvs N2 radiator cover fitting details
Thanks for your explanation.
Will do some similar mods to mine then
Will do some similar mods to mine then
----------------------------------
RD350 YPVS 1990
F2 converted to N2 Red/white 1986 - Figaroli pipes
RD350 YPVS 1990
F2 converted to N2 Red/white 1986 - Figaroli pipes