collars for bikini fairing
Moderator: rztom
collars for bikini fairing
Hey guys, since the collars for the mounts on the bottom fairing (p/n 90387-06701-00) are nla, I was going to spin some up. I don't have any in my possession, and was wondering if somebody could give me the dimension of this part? Thanks, Bruce.
tuned to Paris Hilton specs............rich and retarded!
Re: collars for bikini fairing
Which model bike, bikini fairing or full fairing?
I might be able to help
I might be able to help
Re: collars for bikini fairing
Bikini for the 85 U.S. model. Thank you.
tuned to Paris Hilton specs............rich and retarded!
Re: collars for bikini fairing
ok so they are the ones that fit inside the rubber grommets on the belly pan, yes?
ASFAIK the ferrules are the same size as the tail light ones
I don't get home until Saturday morning, i will have a look for you and report back
Howard
ASFAIK the ferrules are the same size as the tail light ones
I don't get home until Saturday morning, i will have a look for you and report back
Howard
Re: collars for bikini fairing
Actually, doesn't the M6 large head screw that holds the belly pan on have a collar that fits in the grommet to stop crushing the plastic
Not sure even now if there is a grommet on the belly pan on that model, however I'll still check for you
Howard
Not sure even now if there is a grommet on the belly pan on that model, however I'll still check for you
Howard
Re: collars for bikini fairing
If you can get me a picture or dimensions of what you need, I just pulled a few out of one of my parts bins. Just pay postage
Re: collars for bikini fairing
Thanks justind97, lets see if we get some dimensions.
tuned to Paris Hilton specs............rich and retarded!
Re: collars for bikini fairing
Ok the collar that is inside the grommet on the fully faired RZ or F1 is M6 ID x M8 OD x 8mm long
the screw I took out of the belly pan on my 31K LC2 or bikini faired RZ has thread size of M6 and is 100mm long in the thread, there is then a shank that is above the thread that is 10mm in dia, this fits in the mounting hole of the "bikini bottom" belly pan the head of the screw is a large head Phillips that is 18mm dia
There was no grommet in my bikini belly pan, only in the F1 version
that's not to say there should be one there and the screw I took out just happened to fit,
Sorry no pics as PBKT is FKD
HTH
Howard
the screw I took out of the belly pan on my 31K LC2 or bikini faired RZ has thread size of M6 and is 100mm long in the thread, there is then a shank that is above the thread that is 10mm in dia, this fits in the mounting hole of the "bikini bottom" belly pan the head of the screw is a large head Phillips that is 18mm dia
There was no grommet in my bikini belly pan, only in the F1 version
that's not to say there should be one there and the screw I took out just happened to fit,
Sorry no pics as PBKT is FKD
HTH
Howard
Re: collars for bikini fairing
Ok, thank you very much Howard for checking this out and giving me a response. Thanks again.
Bruce.
Bruce.
tuned to Paris Hilton specs............rich and retarded!