yes, they are are quite decently produced, a good balance considering they are not expensive, I didn't want a "superbling" part, just something functional (as you say) and more racing than the oem rearsetstwo-stroke-brit wrote:the rearsets look well made , and very functional.
RD/RZ 350 YPVS Montjuïc Endurance build
Moderator: rztom
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
Re: RD/RZ 350 YPVS Montjuïc Endurance build
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
Re: RD/RZ 350 YPVS Montjuïc Endurance build
I had to spend some time sorting out the electricity, oil hoses and control cables. I also started to investigate why the YPVS didn´t work (PV where mechanically perfect and clean once the engine was refreshed, but even before I opened it up I already saw the problem was not mechanical, the PV were not cycling when switching on the bike).
After checking some resistance values with a multimeter and asking my buddy his PV controller and servo, I discover the problem was much, much obvious, it was actually here
The problem was in the fuse box, the small flexible fuse connectors/retainers were totally overcooked after 25 years of life, just removing one fuse the connectors disintegrated and the electrical connection was not really happening...
Ebay again and got one of this
After checking some resistance values with a multimeter and asking my buddy his PV controller and servo, I discover the problem was much, much obvious, it was actually here
The problem was in the fuse box, the small flexible fuse connectors/retainers were totally overcooked after 25 years of life, just removing one fuse the connectors disintegrated and the electrical connection was not really happening...
Ebay again and got one of this
- steveloomis
- -----
- Posts: 1507
- Joined: Tue Dec 06, 2011 11:18 am
- Location: Oklahoma USA
Re: RD/RZ 350 YPVS Montjuïc Endurance build
I use those eBay fusebox replacements as well. They are so accurate the lid fits from the old one as well. If they last another 25 years, I'll never know.... or at least won't care then....
'81 RD350LC hybrid w/84 RZ engine. Zeel, Old style Toomeys, Yboot and filter 420 main 22.5 pilot, Air screw 2.5 turns out, DJ needle 2nd from top, Canadian VM26 carbs.
'85 KR/RZ US. Tank is seeping causing a blister in paint.....
'85 KR/RZ US. Tank is seeping causing a blister in paint.....
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
Re: RD/RZ 350 YPVS Montjuïc Endurance build
Yes, you are right, if you have the old one and whant it still with the yamaha brand...steveloomis wrote:I use those eBay fusebox replacements as well. They are so accurate the lid fits from the old one as well. If they last another 25 years, I'll never know.... or at least won't care then....
You are right, it is very difficult that I keep riding in 25 years, but not impossible.
Look at these guys:
https://www.youtube.com/watch?v=vksdBSVAM6g" onclick="window.open(this.href);return false;
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
Re: RD/RZ 350 YPVS Montjuïc Endurance build
I will install this system of rfid key and the chinese koso replica
http://s1319.photobucket.com/user/tubeg ... 0.mp4.html" onclick="window.open(this.href);return false;
http://s1319.photobucket.com/user/tubeg ... 0.mp4.html" onclick="window.open(this.href);return false;
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
Re: RD/RZ 350 YPVS Montjuïc Endurance build
Rattlecan time
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
- tubeglower
- Posts: 37
- Joined: Sun Oct 27, 2013 2:20 pm
- Location: Synera
Re: RD/RZ 350 YPVS Montjuïc Endurance build
Dressin' her up...
Re: RD/RZ 350 YPVS Montjuïc Endurance build
Nice job. Meticulous and very professional. Congratulations.
Greetings from Malaga
Greetings from Malaga
Re: RD/RZ 350 YPVS Montjuïc Endurance build
That is a lot of work, but nice job!
90 RZ Race Bike
86 RZ daily driver
85 RZ low milage
86 RZ daily driver
85 RZ low milage
Re: RD/RZ 350 YPVS Montjuïc Endurance build
That is really well done,simple but detailed & functional.
I luv the "Brembo" calipers
What brand are those end cans?
I luv the "Brembo" calipers
What brand are those end cans?
Re: RD/RZ 350 YPVS Montjuïc Endurance build
Blue frame looks very cool!
-
- Posts: 1373
- Joined: Tue Nov 12, 2013 2:34 am
Re: RD/RZ 350 YPVS Montjuïc Endurance build
2 year old thread guys. Just fyi...