UPS , DHL and other courrier service are a bunch of crooks , always ask for USPS / Canada Post when buying in US .ZedSledder wrote:https://www.ebay.com/itm/Yamaha-rd-350- ... tCrufsbWjg
It included free DHL shipping.
I did have to pat a whopper of a tax and duties bill. came to 150$ cdn.
My RZ350 Project in Austin, TX
Moderator: rztom
Re: My RZ350 Project in Austin, TX
Re: My RZ350 Project in Austin, TX
I painted my frame today. 76/24% blend of POR 2k Safety Red/Safety Yellow over Summit White Epoxy primer. I used a Qualspray QS-125WB Touch Up spray gun from http://homesteadfinishingproducts.com" using the 1.2mm nozzle tip. If you ever use that POR 2k, make sure you thin with 25% Xylene.
Last edited by mixalive on Sun Jul 21, 2019 6:37 pm, edited 3 times in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
Saw that on the North American page. Looks great!
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
Re: My RZ350 Project in Austin, TX
Here are some more images after painting.
Last edited by mixalive on Sun Jul 21, 2019 7:34 pm, edited 2 times in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
If he copied my frame design properly, the engine will fit in with the head installed.Smoker wrote:
The important part is to have a bend in the lower rail. I welded 2 pieces together at an angle. Can't tell from the pics, but the lower rail looks straight on this frame. I also welded the lower rails to the top of the swingarm pivot blocks on the frame for strength. The lower rails on this frame are above the blocks.
[/quote]
Earlier in the thread, I posted this: And yes, the engine fits with the head on.
mixalive wrote:Fast forward to 2015, I began researching different frame bracing configurations. I chose a system of braces based on a 90 degree lattice configuration off this site.
Now, I am a pretty good mechanic and novice fabricator. But I am not a welder. So I am fabricating all my frame mods and tacking it up for an expert tig welder. Here is an image of the bracing. I used 7/8 OD X .065 wall 1020 DOM A513 Round Steel. Because of the contour of the frame, the lower bar shown is bent inward 15 degrees at 1L-3L.
Last edited by mixalive on Sun Jul 21, 2019 7:38 pm, edited 1 time in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
The only thing about the paint job is two of the numbers of the VIN are obscured by paint. I suppose I will need to remove the paint to better reveal the VIN. Any thoughts?
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
The bike is already registered to you correct? I doubt you plan on selling it anytime soon after all this effort. Have you ever had anyone examine the VIN number on any vehicle? Why spoil nice paint.
Progress Update
Building the bike with a freshly painted frame. Rear Suspension
Last edited by mixalive on Sun Jul 21, 2019 7:53 pm, edited 2 times in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
Continuing on. FZR600 front end. FZ600 swingarm. FZ400 side stand. Fox Twin Clicker
Last edited by mixalive on Sun Jul 21, 2019 7:56 pm, edited 2 times in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
- Questo vecchio rz
- Posts: 1116
- Joined: Sun Aug 16, 2015 5:55 pm
- Location: Reconquista of California
Re: My RZ350 Project in Austin, TX
That's a really nice project you are building. Years ago, like 25+ years ago I saw 2 custom RZs at the Laguna Seca GP, same owner had modified his frames almost exactly as yours. Since then theres been a dozen or so similar..evwn a couple here.
Overall your bikes gonna look great! Keep up the awesome work my friend
Overall your bikes gonna look great! Keep up the awesome work my friend
Banshee (Baja) race bike,+ 2 A Arms,L.E.Ds, Toomey, +4 stroker IMS tank, run flats.
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
96 GSXR SRAD, Future Yoshimura rep.
85 custom Tri-Z
RZ/YZR bike(project)
86 VFR750 RC24 Merkel replica (project)
Royal Enfield Bullet 500
Re: My RZ350 Project in Austin, TX
Thanks
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
Rebuilt the rear caliper, new rotor and Dot 3-4 brake fluid.
Last edited by mixalive on Sun Jul 21, 2019 7:59 pm, edited 2 times in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
Close up of the RH Rear Sets.
Last edited by mixalive on Sun Jul 21, 2019 8:00 pm, edited 1 time in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
Modified Battery Box.
Last edited by mixalive on Sun Jul 21, 2019 8:04 pm, edited 1 time in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.
Re: My RZ350 Project in Austin, TX
Check out the plugs on the rear frame tubes.
Last edited by mixalive on Sun Jul 21, 2019 8:05 pm, edited 1 time in total.
RZ350 with FZ600 swingarm, FZR600 wheels, front end and FZR400 bodywork.