Got a customizing or restoration project? Discuss it here
Moderator: rztom
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#106
Post
by motosapien » Thu Mar 09, 2017 1:17 am
- IMG_20170308_220718.jpg (116.33 KiB) Viewed 3509 times
Finished right working on the left....
- IMG_20170308_221054.jpg (69.78 KiB) Viewed 3509 times
Switches blasted and ready for paint decals and matte clear coat.
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#107
Post
by motosapien » Thu Mar 09, 2017 9:14 pm
Got the headlight bucket dampers in the mail today. Lot of work lined up for the weekend.
Sent from my Nexus 6 using Tapatalk
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#108
Post
by motosapien » Sat Mar 11, 2017 3:39 pm
Switch housing and decals refurbished
- IMG_20170311_083328.jpg (40.86 KiB) Viewed 3433 times
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#109
Post
by motosapien » Sat Mar 11, 2017 10:04 pm
Handle bars done
- pixlr.jpg (129.04 KiB) Viewed 3411 times
Oil pump is next in line
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#110
Post
by motosapien » Mon Mar 13, 2017 6:04 pm
Pump done! Altered the throttle cable and crimped it back
- IMG_20170313_141739.jpg (89.92 KiB) Viewed 3366 times
- IMG_20170313_141830.jpg (65.44 KiB) Viewed 3366 times
2>4
-
hondaror
- Posts: 2828
- Joined: Mon Mar 03, 2014 8:44 pm
- Location: Alberta, Canada
#111
Post
by hondaror » Tue Mar 14, 2017 2:41 pm
I think the phone pics are not working on my computer. This sucks.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#112
Post
by motosapien » Tue Mar 14, 2017 3:17 pm
not sure why that is happening, is anyone else using taptalk having the same problem?
2>4
-
RuZty
- -----
- Posts: 3584
- Joined: Fri Oct 03, 2003 11:11 pm
- Location: Southern Ontario, Canada
#113
Post
by RuZty » Tue Mar 14, 2017 11:59 pm
Most of your pics show up for me, a few near the top of the previous page are question marks but all the recent ones are good.
-
hondaror
- Posts: 2828
- Joined: Mon Mar 03, 2014 8:44 pm
- Location: Alberta, Canada
#114
Post
by hondaror » Thu Mar 16, 2017 12:56 am
It's working on my iPad.
Rory
2 1984 RZ350s
1985 RZ350
9 1986-1990 RZ350s
2000 ST2
2005 749
2005 749 with 999 engine
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#115
Post
by motosapien » Thu Mar 16, 2017 1:19 am
hondaror wrote:It's working on my iPad.
Great!
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#116
Post
by motosapien » Thu Mar 23, 2017 3:07 pm
More goodies arrived yesterday!
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#117
Post
by motosapien » Thu Mar 23, 2017 7:26 pm
More goodies! Head recut and o-ringed from Eric Gorr
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#118
Post
by motosapien » Mon May 15, 2017 10:57 pm
making progress
Finally put the motor together with o-ring stroker head. Did leak-down test, fixed a leak at one of the bolts in the intake manifold.
Squish 1.02mmm/1.03mm and compression 122&123psi L&R respectively. Learnt that the compression goes after breaking in.
Happy with the outcome.
- 18471812_1467582743262645_1736929621_o.jpg (179.91 KiB) Viewed 2913 times
2>4
-
motosapien
- Posts: 396
- Joined: Tue Aug 26, 2014 2:27 am
- Location: Scottsdale, Arizona
#119
Post
by motosapien » Thu May 18, 2017 1:16 am
Getting there slowly
Sent from my Nexus 6 using Tapatalk
2>4
-
kpke
- -----
- Posts: 2534
- Joined: Sun Nov 23, 2008 2:22 pm
- Location: Livermore, CA
#120
Post
by kpke » Thu May 18, 2017 11:08 am
That is really looking nice