Slingers new un
Moderator: rztom
Re: Slingers new un
Damn, hope that runs and handles as good as it looks. Well done.
Red/White US '84, Spec II pipes, Y-boot w/K&N, Fox Shock, Mikuni carbs?
Re: Slingers new un
Coolant, chain and gas and I should be ready to go. I will need to break in the engine as the top end is fresh... One thing I can say, it is very light! I will start a new thread for this bike, I just wanted to place updated pictures of the bike originally built by Slingers...
In doubt, full throttle!
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
Re: Slingers new un
Wow that,s turn out real nice, good to see the old girl with new colors
-
- Posts: 30
- Joined: Fri Oct 30, 2009 11:16 am
- Location: Halifax, N.S.
Re: Slingers new un
Hey Glyn... Ive been away from the bike scene for a while, but back now!
Very nice to see all these new pictures of the new developments. I'll make a run down to your place soon! Same phone number as always?
Very nice to see all these new pictures of the new developments. I'll make a run down to your place soon! Same phone number as always?
Re: Slingers new un
Hi Glyn, I am trying to register the bike under my name and hopefully circulate on the road after an inspection (currently working on the roadworthiness), not easy, would you have any paper/registration/importation, anything that could help? Many thanks.
In doubt, full throttle!
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
Re: Slingers new un
Hey Glyn, is it ok to post your pic on book-face for the RZ nuts there ?
Back to the original programming
Back to the original programming
84 RZ350 Spec II boost ports shaved head
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl
Re: Slingers new un
Sorry bud I can't help at all, the frame I got from a guy for doing some work, and when I shipped it to Canada it came over as "not to be used on the road" so didn't require papers just DNR wanted to see if there was any mud on it lol.tzrz350 wrote:Hi Glyn, I am trying to register the bike under my name and hopefully circulate on the road after an inspection (currently working on the roadworthiness), not easy, would you have any paper/registration/importation, anything that could help? Many thanks.
Re: Slingers new un
Fill ya boots.......whats book-facewolfman wrote:Hey Glyn, is it ok to post your pic on book-face for the RZ nuts there ?
Back to the original programming
Re: Slingers new un
No prob, thanks for the info. I just realized that the frame is from a TZ250, I thought it was from a TZR250. That leave only one possible route for me, going the artisanal motorcycle route with a new VIN number.slinger wrote:Sorry bud I can't help at all, the frame I got from a guy for doing some work, and when I shipped it to Canada it came over as "not to be used on the road" so didn't require papers just DNR wanted to see if there was any mud on it lol.
In doubt, full throttle!
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
Re: Slingers new un
I was a TZR 125 road bike, I stamped my old race bike frame number on it just in case customs went digging. I clean forgot about that loltzrz350 wrote:No prob, thanks for the info. I just realized that the frame is from a TZ250, I thought it was from a TZR250. That leave only one possible route for me, going the artisanal motorcycle route with a new VIN number.slinger wrote:Sorry bud I can't help at all, the frame I got from a guy for doing some work, and when I shipped it to Canada it came over as "not to be used on the road" so didn't require papers just DNR wanted to see if there was any mud on it lol.
Re: Slingers new un
OK! Mmm, I have a TZR125 Belgarda frame (with papers) doing nothing in my basement (with TZR250 swingarm), but with all the mods done on the "new un" frame, I am not sure that would be an easier route...slinger wrote:I was a TZR 125 road bike, I stamped my old race bike frame number on it just in case customs went digging. I clean forgot about that lol
There are many mods on the frame right?
In doubt, full throttle!
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
Re: Slingers new un
No mods to the frame apart from welding on the rear shock mount. Apart from that it's a stock Belgarda 125 with a 3xv swinging arm.
Re: Slingers new un
No mods to the frame apart from welding on the rear shock mount. Apart from that it's a stock Belgarda 125 with a 3xv swinging arm.
Re: Slingers new un
Thanks!
In doubt, full throttle!
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
1971 Kawasaki F8
1983 RZ350
2002 BMW R1150R w/sidecar
2012 Ducati Monster 1100 EVO
2014 KTM 150SX
1994 TZR350
Re: Slingers new un
Hi, I'm new to the forum. I'm looking at putting a RZ350 motor into a TZR 4DL, I'm trying to get in touch with slinger as I see he has previously made engine mounts & cradle.