RZ/RD 350 & Misc. 2-Stroke Tech BBS

Technical Forums for Two-Stroke Nuts
It is currently Wed Apr 25, 2018 2:05 am

All times are UTC - 4 hours [ DST ]




Post new topic Reply to topic  [ 15 posts ] 
Author Message
PostPosted: Mon Feb 17, 2014 12:14 pm 
Offline
-----
-----

Joined: Fri Mar 07, 2008 8:51 am
Posts: 278
Location: SW Florida
TDR Reeds are available in the std Epoxy fiber or carbon Fiber.

TDR fiber reeds have been used by RZ/RD Racers & riders all over the world for years. Sold by many of my dealers : Economy Cycle, Spec II, Wilson Performance, HVC, etc.

They are available in many different designs & tensions for custom engine builders and specific mods. The standard fiber reed for the RZ/LC 350 is a .020" 1 petal design that eliminates reed flutter. They come with a reed stop spacer that makes this reed a 2 stage or progressive design. The reed goes on the cage , a .015' thick reed stop spacer goes on top of the reed, and then the reed stops go on top. In doing this the reed hinge point is moved back closer to the screws. As the reed opens it comes in contact with the stops and becomes stiffer. This is the second stage of the opening.

#36 RZ/LC 350 TDR Fiber reeds $ 40.00

#36C RZ/LC 350 TDR Carbon Fiber reeds $70.00

#34 RD250/350/400 TDR Fiber Reeds $ 40.00

#34C RD250/350/400 TDR Carbon Fiber Reeds $70.00

All have Free shipping in the Continental US.


They are also listed on EBAY for the same price. Call me at 941-505-0800 , e-mail: tdrinc@embarqmail.com , or post & PM me here if you need anything custom or have any questions.

Image

_________________
" Curing my Midlife CRISIS 1 turn at a time"

http://www.tdrracing.com

www.tdrrz.com


Last edited by TDR_50 on Wed Apr 22, 2015 7:58 am, edited 2 times in total.

Top
 Profile  
Reply with quote  
PostPosted: Tue Feb 18, 2014 7:21 am 
Offline
-----
-----

Joined: Fri Oct 03, 2003 11:11 pm
Posts: 3355
Location: Southern Ontario, Canada
I ran a set of these (fiberglass) for years on opened up stock reed blocks. They were a noticeable improvement over the dual petal Boyesons that came with the engine and still look like new. Good customer support on the phone too.


Top
 Profile  
Reply with quote  
PostPosted: Tue Feb 18, 2014 8:48 am 
Offline
User avatar

Joined: Sat Oct 10, 2009 4:33 am
Posts: 9509
Location: Sydney
Just a thought.... maybe offer a little forum discount. Even if it was just the equivalent of the ebay fees?

_________________
My Projects:
Yamaha '85 RZ350 F1 & '83 RZ & RD Athena 421 LC & XT500 Supermoto & Honda MT250... See them all on www.2smoked.com

Like Watches? You will love www.PloProf.com & www.DeskDivers.com


Top
 Profile  
Reply with quote  
PostPosted: Tue Feb 18, 2014 12:14 pm 
Offline
-----
-----
User avatar

Joined: Tue Dec 06, 2011 11:18 am
Posts: 1506
Location: Oklahoma USA
I am anxiously awaiting the return of my modified reed blocks and TDR Fiberglass reeds from TDR. He is also making a set of R1 4 pot caliper adapters for my 85 USA RZ.

_________________
'81 RD350LC hybrid w/84 RZ engine. Zeel, Old style Toomeys, Yboot and filter 420 main 22.5 pilot, Air screw 2.5 turns out, DJ needle 2nd from top, Canadian VM26 carbs.
'85 KR/RZ US. Tank is seeping causing a blister in paint.....


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 24, 2014 11:16 am 
Offline

Joined: Mon May 28, 2012 9:10 am
Posts: 84
Location: Upstate, NY
steveloomis wrote:
I am anxiously awaiting the return of my modified reed blocks and TDR Fiberglass reeds from TDR. He is also making a set of R1 4 pot caliper adapters for my 85 USA RZ.

Please post a picture and cost of the adapters when you get them.


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 24, 2014 11:20 am 
Offline
-----
-----

Joined: Fri Mar 07, 2008 8:51 am
Posts: 278
Location: SW Florida
The brake adapters will be posted here in the vendors section with pics & prices when they are done.

_________________
" Curing my Midlife CRISIS 1 turn at a time"

http://www.tdrracing.com

www.tdrrz.com


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 24, 2014 11:40 am 
Offline

Joined: Mon May 28, 2012 9:10 am
Posts: 84
Location: Upstate, NY
TDR_50 wrote:
The brake adapters will be posted here in the vendors section with pics & prices when they are done.

:smt023


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 24, 2014 8:30 pm 
Offline
Moderator
User avatar

Joined: Fri Dec 11, 2009 9:56 pm
Posts: 974
Location: Niagara Ontario Canada
:smt023
Awesome price for carbon reeds!
And free shipping!
:smt023

What brake rotors(size) are these caliper adapters being created for?

_________________
Colin
79 RD400F Daytona Special
81 RD350LC
89 TDR250
75 Kawasaki H1 500
77 Can-am Tnt250


Top
 Profile  
Reply with quote  
PostPosted: Mon Feb 24, 2014 8:54 pm 
Offline
-----
-----
User avatar

Joined: Tue Dec 06, 2011 11:18 am
Posts: 1506
Location: Oklahoma USA
Stock 85 RZ at least, not sure if they will fit anything else. That is what I will use them on.

_________________
'81 RD350LC hybrid w/84 RZ engine. Zeel, Old style Toomeys, Yboot and filter 420 main 22.5 pilot, Air screw 2.5 turns out, DJ needle 2nd from top, Canadian VM26 carbs.
'85 KR/RZ US. Tank is seeping causing a blister in paint.....


Top
 Profile  
Reply with quote  
PostPosted: Fri May 08, 2015 10:05 pm 
Offline
-----
-----
User avatar

Joined: Fri Nov 22, 2013 10:49 pm
Posts: 1404
Location: Houston texas
i had a miscommunication with TDR .but when i realized my mistake ,he was quick to rectify the situation .
great communication and after sales service
thanks mark.

_________________
350LC,Athena 392 big bore,stock porting,swiss cheese air box,stock reeds,spec11 pipes.
She might not be pretty but she will always be a fun ride

1973 KAWI 500 H1 (sold)
1982 YAMA RD350LC
2000 KAWI 200 KDX
2004 BMW R1150RT


Top
 Profile  
Reply with quote  
PostPosted: Fri May 08, 2015 11:11 pm 
Offline

Joined: Wed Feb 20, 2013 11:43 pm
Posts: 935
Location: Cloverdale, CA
I have his reeds in both the bikes. Hold up well, work great.


Top
 Profile  
Reply with quote  
PostPosted: Sat May 09, 2015 9:50 am 
Offline
-----
-----

Joined: Fri Mar 07, 2008 8:51 am
Posts: 278
Location: SW Florida
Thanks Mark & mkane, Trying to get some time to do a posting on the reed cage mods that I did for Steve Loomis. Just don't have the time.

_________________
" Curing my Midlife CRISIS 1 turn at a time"

http://www.tdrracing.com

www.tdrrz.com


Top
 Profile  
Reply with quote  
PostPosted: Sat May 09, 2015 10:43 am 
Offline

Joined: Wed Feb 20, 2013 11:43 pm
Posts: 935
Location: Cloverdale, CA
That would be interesting. I have VForce Banshee reeds for my A/C track bike but they won't fit. Currently there's Banshee cages in there.


Top
 Profile  
Reply with quote  
PostPosted: Sat Oct 03, 2015 6:03 pm 
Offline

Joined: Wed May 13, 2015 1:11 am
Posts: 296
Location: Pacifica,,
These are the RZ350 brake adapter brackets fitted, Tony is a top guy, I have his reeds in my bikes and adapters on this one bike, Really nice, clean finish,,

Image


Top
 Profile  
Reply with quote  
PostPosted: Sun Oct 04, 2015 9:46 am 
Offline
-----
-----

Joined: Fri Mar 07, 2008 8:51 am
Posts: 278
Location: SW Florida
Thanks for the post tacky1. I will be doing another run of adapters when I get back fro Barber Vintage fest. I have lots of backorders to fill.

_________________
" Curing my Midlife CRISIS 1 turn at a time"

http://www.tdrracing.com

www.tdrrz.com


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 4 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group