So, my flasher was dying and finally died and I was looking for a fix on line and decided to go old school and find out for myself. This is the third time I popped the top and started the process. I plugged it in, (new shorai batt) and left the top off and pressed ever so slightly on the mech. and voila, it flashed.
So I took a exacto knife and pried up on the steel spring to release some pressure and lo and behold it flashes now !!! Fixed!
Too lazy to post pictures but just relieving some pressure on the spring did the trick !
Slow or non working flasher fix
Moderator: rztom
Slow or non working flasher fix
84 RZ350 Spec II boost ports shaved head
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl
-
- Moderator
- Posts: 7038
- Joined: Wed Mar 24, 2010 2:20 am
Re: Slow or non working flasher fix
Thanks for posting that info.
Would be great if that was the fix we all needed. I have a box full of flashers that are slow or just don't work.
Would be great if that was the fix we all needed. I have a box full of flashers that are slow or just don't work.
Re: Slow or non working flasher fix
other than a 30 year old charging system pushing that lump, a looser spring did the trick.
84 RZ350 Spec II boost ports shaved head
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl
Y boot 29mm PWKs billet manifold TDR Reeds Spec II pipes
Fox twin clicker JMC Braced swing arm
Tarozzi fork brace
Brembo 19 RCS Master ss lines blue spots EBC Vees
Spec 2 Full Fairing factory Solo Cowl