Does anyone know the screw or bolt size needed for securing the petcock to the fuel tank?
Didn't get the 2 of them as well as the washers with the tank and petcock in my basket case.
Thanks,
Tim
Petcock Screws, Washers
Moderator: rztom
Re: Petcock Screws, Washers
The part number for those screws is 90149-06011-00, and the nice thing about Yamaha part numbers is that you can tell the screw size from the second part of the number. The 06 means it is an M6 screw and the 011 means it is 11mm long.
Tod
'75 RD350
'84 RZ350
'84 Kawasaki ZX900 Ninja
'75 RD350
'84 RZ350
'84 Kawasaki ZX900 Ninja
Re: Petcock Screws, Washers
Tried using other types of screw/bolts,never worked. Bought the proper wide headed screws & washers never a prob.....just sayin.
Re: Petcock Screws, Washers
I've used stainless socket head, but still with the seal washer and had good results. I might have wiped a bit of Threebond on the threads too.