g'day. Wondering if anyone has swapped rz rear brake master cylinder to an alternative? looks like and R1 or maybe xt master cylinder would fit?
I have just stripped my rz M/C, it will need a rebuild kit but before i order one i thought i'd ask the question to see if an alternative M/C can be used?
rear brake master cylinder alternatives??
Moderator: rztom
-
- Posts: 291
- Joined: Sun Sep 16, 2012 7:10 am
- Location: gold coast Australia
rear brake master cylinder alternatives??
yamaha fanatic.
-
- Posts: 1375
- Joined: Tue Nov 12, 2013 2:34 am
Re: rear brake master cylinder alternatives??
Have a spare here if needed I can break from rear setup. In Canada but sure we could get it down there cheap enough. No clue on alternatives.
Re: rear brake master cylinder alternatives??
fitted to lots of yams of the era, but easy to rebuild and the kit is good value from yam overseas, not an Aussei dealer o course.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: rear brake master cylinder alternatives??
I used an FZR 400 one.
It's identical to the RZ, just the bolt needs to be cut a small amount if I remember right.
It's identical to the RZ, just the bolt needs to be cut a small amount if I remember right.
Bye
Martin
Martin
-
- Posts: 291
- Joined: Sun Sep 16, 2012 7:10 am
- Location: gold coast Australia
Re: rear brake master cylinder alternatives??
Thanks for the advice guys. Martins comment pricked my ears. I have a fzr400 3tj sp frame in my back shed that has the original rear brake mc still on it. i have serviced and painted it, bolts up the same and i didn't have to go out for it. thanks Gents.
yamaha fanatic.
Re: rear brake master cylinder alternatives??
The earlier R6 used a Brembo one that looked identical, you had to slot the top hole by about 1mm to get it to be a direct fit.