It is a black pressed in plug that replaces the threaded plastic drive. It sits flush with the top of the case.
![Image](https://i.imgur.com/sFqajNZ.jpg)
Moderator: rztom
It is a black pressed in plug that replaces the threaded plastic drive. It sits flush with the top of the case.
I was kidding75RD350rider wrote: ↑Wed Nov 11, 2020 8:12 pm I have used DOT5 in numerous bikes for at least 15 years and have never experienced a problem. The problem is not the fluid.
Great idea, thanks Jon. I'll go do that right now.
kobra, nice one. Thanks for that. I have added that to my parts list spreadsheet and will order on my next McMaster Carr order. $8.39 per pack of 25. Can those be used in place of the PV O-rings (high heat)?kobra wrote: ↑Sun Jan 24, 2021 12:35 am Coincidentally the neutral switch and YPVS bushing holders use the same size o-ring. I bought a bag of them made from viton that should hold up well.
https://www.mcmaster.com/9464K87/