kpke Thrasher Engine Rebuild
Moderator: rztom
Re: kpke Thrasher Engine Rebuild
Cops are out in force this weekend.
Good to see the repairs happening. I have been checking back to see how it was going.
Good to see the repairs happening. I have been checking back to see how it was going.
Re: kpke Thrasher Engine Rebuild
Yesterday I changed out this secondary 90° fuel petcock because I thought it had reached its end of life and was leaking.
No such luck. I have a stuck float valve in the left carburetor. From sitting
Whilst monkeying around with this bike I did the spring trick on the oil supply line. Note how it is starting to get a kink in the before pic.
Before
After
No such luck. I have a stuck float valve in the left carburetor. From sitting
Whilst monkeying around with this bike I did the spring trick on the oil supply line. Note how it is starting to get a kink in the before pic.
Before
After
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1
Re: kpke Thrasher Engine Rebuild
I think I see some Briggs & Stratton parts there: the valve, the clamps and the formed fuel hoses!
85 RZ350 daily rider Toomeys, FZ swinger & wheel, Fox shock, Raasks
85 RZ350 JLs, FZ swinger, Katana rear & CBR929 front wheel, CBR600F4 forks & brakes
75 RD350 Ritter-tuned top end, PWK28s, JLs, HPI, TDR wheels, GSX-R forks, Motolana swinger
85 RZ350 JLs, FZ swinger, Katana rear & CBR929 front wheel, CBR600F4 forks & brakes
75 RD350 Ritter-tuned top end, PWK28s, JLs, HPI, TDR wheels, GSX-R forks, Motolana swinger
Re: kpke Thrasher Engine Rebuild
It's a hybrid dude
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1
Re: kpke Thrasher Engine Rebuild
Way to utilize your resources!
85 RZ350 daily rider Toomeys, FZ swinger & wheel, Fox shock, Raasks
85 RZ350 JLs, FZ swinger, Katana rear & CBR929 front wheel, CBR600F4 forks & brakes
75 RD350 Ritter-tuned top end, PWK28s, JLs, HPI, TDR wheels, GSX-R forks, Motolana swinger
85 RZ350 JLs, FZ swinger, Katana rear & CBR929 front wheel, CBR600F4 forks & brakes
75 RD350 Ritter-tuned top end, PWK28s, JLs, HPI, TDR wheels, GSX-R forks, Motolana swinger
Re: kpke Thrasher Engine Rebuild
Looks like the tubing could still crimp inside that spring, unless the spring ID is really tight around the uncrimped tubing OD.
There's tubing available with the spring within the tubing wall. Pretty sure I found it on fleabay for a reasonable price.
Re: kpke Thrasher Engine Rebuild
I realize this thread is a year old but I just finished it front to back as I am undergoing the same basic procedure and I found it very complete and informative, thanks to Ken and everyone
Re: kpke Thrasher Engine Rebuild
Installed a steering damper
Ken's Garage
https://www.youtube.com/c/KensGarage1
https://www.youtube.com/c/KensGarage1