Anyone have pictures or description of how the harness routes in its stock form in and around the plastic tray and the airbox? Trying to get this right the first time.
From the front ive got it through the middle of the triple by headstock into the front headlight trim. Tight under the rail into the frame flex metal retainer then up on the right and over the tab on the plastic tray. Above the frame cross-rail (unsure if over or under?) then above the tab on the side of the airbox.
Questions:
Should I be above or under the frame x-rail between the plastic tray and the airbox?
What direction does the stator wiring bundle go around the airbox?
Where should the end bundle of wiring go near the airbox?
Pics would be most helpful if anyone has them!
Thanks
Evan
83 Harness routing under tank around airbox
Moderator: rztom
-
- Posts: 1375
- Joined: Tue Nov 12, 2013 2:34 am
-
- Moderator
- Posts: 7038
- Joined: Wed Mar 24, 2010 2:20 am
Re: 83 Harness routing under tank around airbox
This link will take you to some images tacky1 posted in 2020 viewtopic.php?t=16428#p165896
Lower down that page at post #6 you'll find a link to harness routing images kobra has on imgur
Lower down that page at post #6 you'll find a link to harness routing images kobra has on imgur
-
- Posts: 1375
- Joined: Tue Nov 12, 2013 2:34 am
Re: 83 Harness routing under tank around airbox
Thank you!
Also found this one. Routes things slightly different around airbox but shouldn't matter as under tank.
https://photos.smugmug.com/Yamaha-RZ350 ... %29-X3.jpg
Also found this one. Routes things slightly different around airbox but shouldn't matter as under tank.
https://photos.smugmug.com/Yamaha-RZ350 ... %29-X3.jpg