turns out 10% acid vinegar did the job. BUT as I was not aware it also eats aluminum so my 8$ Chinese petcock valve is no more but any 34 MM petcock should work.
""note to self" acid eats aluminum. You learn shit everyday!!
New to me Cheapo 84 RZ350 build
Moderator: rztom
-
- Posts: 34
- Joined: Tue Jul 24, 2018 8:45 pm
-
- Posts: 34
- Joined: Tue Jul 24, 2018 8:45 pm
Re: New to me Cheapo 84 RZ350 build
got my frame back from the sandblasting/ powder coat shop 350$ satin black the picture don't do it justice. It is like factory!! but 30 years old
now iv got something to put together over the Canadian winter.
now iv got something to put together over the Canadian winter.
-
- Posts: 34
- Joined: Tue Jul 24, 2018 8:45 pm
Re: New to me Cheapo 84 RZ350 build
its so good I think I will get the tank, and front end and swinger done next year same theme but white for tank and wheels
( I can wrap or plasti dip over the white if I feel like a different color later)
( I can wrap or plasti dip over the white if I feel like a different color later)
Re: New to me Cheapo 84 RZ350 build
Looks great! But it also looks like a lotta work! Have fun.
89 Canadian Spec RD-350
2013 BMW R1200RT
2007 Harley XL1200C Sportster
2008 Ducati 1098R
2015 Gas Gas 300 Trials bike
1972 Turbo-Charged 240Z
Zastava Black Arrow .50 BMG
2013 BMW R1200RT
2007 Harley XL1200C Sportster
2008 Ducati 1098R
2015 Gas Gas 300 Trials bike
1972 Turbo-Charged 240Z
Zastava Black Arrow .50 BMG
-
- Posts: 34
- Joined: Tue Jul 24, 2018 8:45 pm
Re: New to me Cheapo 84 RZ350 build
well here's a side update the bike sits in a spare room in my house,
and I have a new one a track bike that was run a Shubenacadie track up here on the east coast
the only issue is a cracked head and there's plenty of used one on ebay
start and runs, aftermarket pipes, aftermarket 2 in 1 intake running single carb, Fzr4or 600 front end
and I trade 1 1988 YSR50 with a 80CC kit and the usual aftermarket stuff
The Vin is clean I just don't have papers yet for it. I am planning on runnig this setup on the build
let me know what setup you think be better for street riding
and I have a new one a track bike that was run a Shubenacadie track up here on the east coast
the only issue is a cracked head and there's plenty of used one on ebay
start and runs, aftermarket pipes, aftermarket 2 in 1 intake running single carb, Fzr4or 600 front end
and I trade 1 1988 YSR50 with a 80CC kit and the usual aftermarket stuff
The Vin is clean I just don't have papers yet for it. I am planning on runnig this setup on the build
let me know what setup you think be better for street riding
- Attachments
-
- new1983--33E--RZ350.jpg (155.73 KiB) Viewed 499 times