LC Parts for Sale

[evan_calgary]

I've got much of a LC sitting here that is missing too many parts to restore so it is getting parted out.

This is the majority of a motorcycle less the items below. If you are interested in parts let me know and I can send pics. I have no problems shipping worldwide but intl shipping costs are high these days. In Canada but I ship to USA from 59484 @ USPS rates + a couple bucks.

Do not have:
Clocks (I do have a low mile long speedo)
Bodywoork (I do have a front and rear fender as well as a decent tank)

Notes:
Have a rebuilt crank that will need to be trued
Do have complete motor. The barrels are good but one exhaust thread on one side will need repair.
Only bodywork is front fender, one side panel (cracked) and a gas tank

[expat]

Do you have a rear fender? I am looking for one to cut or a cut one.
Also looking for a set of good turn signals.

[evan_calgary]

Getting through this...

Engine:
Crank, rebuilt but needs to be trued.
Cases: Good
Transmission: Good
Barrels: OEM size bore 64mm. Bores fairly good, some light scoring. No porting.
Head: Good
Carbs: Good, ultrasonic cleaned
Reeds/intakes/crossover: Good shape, no cracks, boyesen fiber reeds
Oil Pump
Rest of engine also available, covers/bits/clutch all there.

Electrical: (not a lot)
Coil
Ignitor
Tail Light
Head light with bucket
no wiring harness, R/R, turn signals

Body:
Tank. Good, no dents but may have some bondo. Does not appear to have rust issues which almost all of these tanks have.
Forks, good, not rusted
shock
wheels
frame
Front Fender
Grab rail
-No seat, no rear fender, no oil tank.

Misc:
Low km speedo. back casing cracked.
rear inner fender (one crack which will be repaired). Uncut.
Rear plate holder

[pdxjim]

PM'd you over on 2strokeworld

[expat]

Thanks for the list. Your original post says you do have a rear fender but I assume from the list you don’t..

[silverstrom]

You have PM Evan.

[evan_calgary]

I do have a good rear fender.

Replied to those that msged

[expat]

Can you let me know the price for the rear fender shipped to MA01612 USA please?
Do you have any pics?

[Kyleh52]

PM sent

[L.B]

Hi Evan,im still after stator & rotor if you can help?
Also after late set of calipers....?

[Yamavarna]

Pm sent

[Darrell]

Does anyone know if the LC grab rail will fit an 89 Canadian-spec RD? I know the US RZ grab rail does not fit. Evan, I'm interested in the grab rail if it'll fit my bike.

[OldTZracer]

The LC grab rail is not interchangeable with the RZs...

[evan_calgary]

Thanks TZ. That is correct. It does not fit.

Most of these parts are gone. I have a shock/swinger cases, transmission, a couple cranks, stator and rotor, triples and a shock cover fender. Just about all that is left.

[L.B]

Evan,emailed you.