RZ350 TZR 3XV Hybrid

[kpke]

First and foremost, I am in need of a non-broken front fender for the TZR250 3XV front end for this project. Please notify me if you know the whereabouts of one.

This build will be documented on your favorite YouTube channel.

https://www.youtube.com/c/KensGarage1

Here is the playlist link if you would like more details on this project.

RZ350 TZR 3XV PROJECT

https://www.youtube.com/playlist?list=P ... k-YlBE-IPN


1985 RZ350 Original California Motorcycle


This was another abandoned project I collected some time ago. On 7/20/14.








Jumping on this project right away, I needed some silencers for those cool expansion chambers.

8/23/14 These were delivered by Frame Maker today TZMike CF Cans



And almost ten years later
12/4/23


Frame, suspension, expansion chambers, and engine rebuild/modifications were performed by Brian Turfrey about 15 years ago.





















And the accompanying YouTube video

[Yamavarna]

Ken,

Your vid’s are getting more polished and enjoyable

[kpke]

Much appreciated

[75RD350rider]

Excellent as always Ken.

[kpke]

Thanks Tim!!!

[giron]

Ken
I'm glad to see you are starting on Brett old project. Like the way Brian grafted the 3XV SP swingarm and of course Brian's pipes.

[kpke]

Thanks George. I'm looking forward to testing this bike out with the BT suspension mods and engine.

If any one has a front fender for this thing it would be you.

Do you have a non broken one available or can you get me one (any color)?

Ken

[giron]

Ken
My RZ350 is similar to your project. My has the 3XV SP swingarm, but the wheels and forks are from a VJ22SP. The reason I'm using the VJ222 SP forks is a little taller but also I wanted to run the six piston calipers from a GSXR750. I liked having over brake vehicles like on my 911. you and I have the only two RZ350 with the 3XV swingarms grafted by Brian Turfrey.

Keep an eye out for a PM from me if I find a front fender for a 3XV. The fender has to be for SP since I was the one that source the 3XV suspensions parts for Brett.

[kpke]

Much appreciated!!!

[giron]

I just PM you

[kpke]

I just PM you

[kpke]

12/5/23 & 12/6/23 EP2

I am in need of the following for this project:
1. TZR250 3XV Not broken front fender, color does not matter
2. 99-05 R6 no dent no rust fuel tank, color does not matter
3. 06-07 R6 seat



The motorcycle requires stripping to the frame for some mods to be done by our favorite fabricator mad scientist Frame Maker.


Some pics of the BT frame mods.









Removed a bunch more parts including the engine.








Fat pipes on the right.












Help!!! I need a 3XV front fender







Ep2 video

[giron]

ken

I found pictures of the parts you have before shipping from Japan. They came off a SPR. Are you planing in running an oil tank

[kpke]

Thanks George. Do I need a specific SPR fender then or any 3XV? Yes on the oil injection although it will require a custom oil tank.

[giron]

Ken

I believe all SP and SPR fenders are the same . I have two SP forks here. One is a 1992 and the other one is the 3XV-7 ( the black anodize forks). Brian rebuild both of them and he informed that the black anodize forks are better internally. I opted to change the forks for when I do my hybrid. I know the basic 3XV forks are smaller in diameter and the lower and upper tree are different.