Hi all.
I recently acquired an RZ500 and it is missing a rear peg.
Does anyone know if other Yamaha models shared the same pegs? I would imagine there were at least a few models that are the same.
Many thanks!
Rear footpeg interchangability?
Moderator: rztom
-
- Posts: 224
- Joined: Sat Aug 04, 2012 2:01 am
- Location: Ventura, California
Re: Rear footpeg interchangability?
I may be wrong but based on the first three digits (47X or 51X) of the part numbers for the left passenger foot peg (47X-27430-00 or 51X-27430) and the right passenger foot peg (47X-27440-00 or 51X-27440-00), I'm guessing the passenger foot pegs are a RD/RZ/RZV 500 item only. Hopefully someone else with a better knowledge base will confirm or clarify
The breakdown for the 47X part is for '84 47X bikes . The 51X part is for all else: 51X and 1GG, 52X and 1GE bikes. I was hoping to verify availability or NLA status but the Owner's Group Parts List Lookup site appears to be down or lost in the most recent site crash. Here's the link in case it starts working -
https://www.rzrd500.com/parts/allentries.php
Hope this helps and good luck with your search.
The breakdown for the 47X part is for '84 47X bikes . The 51X part is for all else: 51X and 1GG, 52X and 1GE bikes. I was hoping to verify availability or NLA status but the Owner's Group Parts List Lookup site appears to be down or lost in the most recent site crash. Here's the link in case it starts working -
https://www.rzrd500.com/parts/allentries.php
Hope this helps and good luck with your search.
Re: Rear footpeg interchangability?
Many thanks for the information.
I will try to investigate further!
If anyone has a spare left side rear peg laying around, please shoot me a PM!!
I will try to investigate further!
If anyone has a spare left side rear peg laying around, please shoot me a PM!!
Re: Rear footpeg interchangability?
Take a look at Yamaha DT 125 X.
My sons both ride 2004 DT 125 X (DE06) and they appear to have the same foot pegs rear, as fitted to our RD 500's. They even have provision for being drilled and tapped to have the wear bolts fitted underneath.
Take a look here: https://cdn.visordown.com/11011_0.jpg
The picture should be of decent quality, allowing you to zoom in.
/Steen
My sons both ride 2004 DT 125 X (DE06) and they appear to have the same foot pegs rear, as fitted to our RD 500's. They even have provision for being drilled and tapped to have the wear bolts fitted underneath.
Take a look here: https://cdn.visordown.com/11011_0.jpg
The picture should be of decent quality, allowing you to zoom in.
/Steen
If I had a signature, it would be good.
Re: Rear footpeg interchangability?
Cheers! Looks like it could be an option. Will check part numbers etc.