Finally Started working on My Own Project....
Moderator: rztom
Re: Finally Started working on My Own Project....
awesome looking jacket for sure... I've been looking half-assedly for similar but without the speed hump!!!!
Re: Finally Started working on My Own Project....
Bolly,bolly wrote:awesome looking jacket for sure... I've been looking half-assedly for similar but without the speed hump!!!!
You can customize this companies jackets how ever you want. I highly recommend you have a look.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Finally Started working on My Own Project....
looks great!!!
Re: Finally Started working on My Own Project....
Good Middle of December to You All.
Finally making a little progress the past few weeks.
Got frustrated at my own progress with polishing the Toomey silencers so dropped them at the polisher that did the swingarm...$60.00 later they are awesome. Money so well spent!
Last night I finished up the mods on a set of OEM reed cages. My personal mods that I use on the Phase III and above engines. I then proceeded to do a little polishing on the cage lip and also the cage spacers.
Pictures over the weekend for sure.
I'm going to be spending a bunch of time over the Christmas/New Years working on the beast to get it much further along. Now that the cages are complete I'm near ready to put the engine together, WOW it really is going to happen!
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Finally making a little progress the past few weeks.
Got frustrated at my own progress with polishing the Toomey silencers so dropped them at the polisher that did the swingarm...$60.00 later they are awesome. Money so well spent!
Last night I finished up the mods on a set of OEM reed cages. My personal mods that I use on the Phase III and above engines. I then proceeded to do a little polishing on the cage lip and also the cage spacers.
Pictures over the weekend for sure.
I'm going to be spending a bunch of time over the Christmas/New Years working on the beast to get it much further along. Now that the cages are complete I'm near ready to put the engine together, WOW it really is going to happen!
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Finally Started working on My Own Project....
Well here we go....
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/20131215_225932_zpsf22d8652.jpg)
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/20131215_225932_zpsf22d8652.jpg)
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Finally Started working on My Own Project....
Happy New Year Fellow Club Members and Future Club Members!:
Been waffling around about posting too much more progress for a few reasons I guess; 1. not much progress as of late (winter duldrums got me down a bit), 2. doesn't seem like there's that much interest in my project anyways.
Still loads to be done. As soon as I think I've made a dent I look up and see tons more detailed things needed yet.
I spent some time over the Christmas break (took some vacation days) and cleaned up all the wiring bits, the instrument bits, retaped and detailed cleaned everything. Got the front turn signals sorted and custom fit so they will hug the body panels nicely. Spent another hundred bucks at the plater doing bits I missed in the first large load of parts they did for me.
Last week I installed the UFOs in the carb slides and last night I started the process of seating them. A lot more detail work making them seat just perfect, got two of them done before retiring for the night.
The engine is all together and sitting on the side bench on the cool little stand I built for it. I fitted two carbs and have been playing with mock ups for an airbox design for the 34s. Very preliminary for sure. I'm thinking that the left side will not allow for as large a filter as I'm mocking up on the right hand side now.
I'm holding off of the engine pics for now until I can get a good camera and lighting to do a good shoot.
Hoping to see my tail bodywork back from the painter anytime soon as well the White Power shock. The shock is really nice. I sent it in as a check up and recharge right after I received it in December.
Still have to attached the decals on the cowling and then clear coat everything. A bit daunting for now.
More later.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Been waffling around about posting too much more progress for a few reasons I guess; 1. not much progress as of late (winter duldrums got me down a bit), 2. doesn't seem like there's that much interest in my project anyways.
Still loads to be done. As soon as I think I've made a dent I look up and see tons more detailed things needed yet.
I spent some time over the Christmas break (took some vacation days) and cleaned up all the wiring bits, the instrument bits, retaped and detailed cleaned everything. Got the front turn signals sorted and custom fit so they will hug the body panels nicely. Spent another hundred bucks at the plater doing bits I missed in the first large load of parts they did for me.
Last week I installed the UFOs in the carb slides and last night I started the process of seating them. A lot more detail work making them seat just perfect, got two of them done before retiring for the night.
The engine is all together and sitting on the side bench on the cool little stand I built for it. I fitted two carbs and have been playing with mock ups for an airbox design for the 34s. Very preliminary for sure. I'm thinking that the left side will not allow for as large a filter as I'm mocking up on the right hand side now.
I'm holding off of the engine pics for now until I can get a good camera and lighting to do a good shoot.
Hoping to see my tail bodywork back from the painter anytime soon as well the White Power shock. The shock is really nice. I sent it in as a check up and recharge right after I received it in December.
Still have to attached the decals on the cowling and then clear coat everything. A bit daunting for now.
More later.
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Finally Started working on My Own Project....
no interest? Nonsense, we hang on every word, and photo you post! .......... aw, just clowning around, of course we are interested, so keep posting updates.
Re: Finally Started working on My Own Project....
Any progress is good with the cold weather you have been having. it will all be worth it. Keep us posted.
- jackson.40
- *****
- Posts: 2328
- Joined: Fri Dec 30, 2005 7:01 pm
- Location: Cambridge,UK
Re: Finally Started working on My Own Project....
I look forward to the engine photos,keep up the good work
I hate winter too,slows me right down![Sad :sad:](./images/smilies/icon_sad.gif)
![Cool :cool:](./images/smilies/icon_cool.gif)
I hate winter too,slows me right down
![Sad :sad:](./images/smilies/icon_sad.gif)
Re: Finally Started working on My Own Project....
OK...still not a large response. Fact is I'm not a road racer as you all well know, never have been, never will be. I do like it but most of all I like fast two-stroke motorcycles. My goal with this project wasn't a replica (as I've stated before), nor any type of retro build. It's a show quality piece that is also stupid fast. Given my own budget and time frame I limited the headaches and modifications to those you see, i.e., front and rear ends, wheels, frame etc. For what I've got it's some nice stuff and I'm only trying to make it nicer.
The goal is a show bike and I'm sure it will show well.
So, here are a few pictures of the assembled engine on the little custom stand I built just to take pictures of it.
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/TheBeast1_zpsc9cca590.jpg)
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/TheBeast2_zpsa77ab1d2.jpg)
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/TheBeast3_zps86fb350a.jpg)
Airbox Ideas...
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/IntakeBox5_zpsa4621618.jpg)
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/IntakeBox4_zps21afddb0.jpg)
Your thoughts?
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
The goal is a show bike and I'm sure it will show well.
So, here are a few pictures of the assembled engine on the little custom stand I built just to take pictures of it.
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/TheBeast1_zpsc9cca590.jpg)
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/TheBeast2_zpsa77ab1d2.jpg)
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/TheBeast3_zps86fb350a.jpg)
Airbox Ideas...
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/IntakeBox5_zpsa4621618.jpg)
![Image](http://i5.photobucket.com/albums/y189/wvwrz500n/IntakeBox4_zps21afddb0.jpg)
Your thoughts?
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net" onclick="window.open(this.href);return false;
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Regards,
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Bill Wilson
Wilson Performance
Lee's Summit, MO
http://www.wilsonperformance.net
Member RZ500 Owners Group #573
816-377-3185
WVWRZ500N@aol.com
Re: Finally Started working on My Own Project....
Waow !
That Engine looks so good !
Wish it should go in my bike.....
Looking at those fotos I almost only see the soon 30 years of worn on my Engine.
That one looking (much) better then new!
And that even if it´s orange
// Jeppe
That Engine looks so good !
Wish it should go in my bike.....
Looking at those fotos I almost only see the soon 30 years of worn on my Engine.
That one looking (much) better then new!
And that even if it´s orange
![Cool :cool:](./images/smilies/icon_cool.gif)
// Jeppe
Re: Finally Started working on My Own Project....
When you said red I was worried, but that engine looks really nice. You wanted different and it is. It shows off all the details that makes the engine so different than anything else. Can not say it enough, the detail work is nice. Replating the parts really does the trick.
Last edited by pstamper on Mon Jan 27, 2014 1:25 pm, edited 1 time in total.
Re: Finally Started working on My Own Project....
that is amazing!!!!
Re: Finally Started working on My Own Project....
Beautiful quality work !! - colours not to my taste - but the important thing is that you like them !
Cheers
Paul
Cheers
Paul
Re: Finally Started working on My Own Project....
color is not my cup of tea either , but i asume the detail is more important ,and as long it runs well and u like it urself ![Very Happy :grin:](./images/smilies/icon_biggrin.gif)
![Very Happy :grin:](./images/smilies/icon_biggrin.gif)
my bikes :RD500 2X ,RD 350 F2 , RD 350 31K,RD350 4LO,RG500,RG250 WW,RGV250,TZR250 3MA,TZR250 3XV,NS400r,NSr250 mc21,KR1250S,