RZ/RD 350 & Misc. 2-Stroke Tech BBS

has to be slightly narrowed at the pivot, at the asking price I will narrow the pivot. Using the R6 shock requires a new upper mount. I will sell the arm only for $300, it will be a bolt up with two spacer washers added to the dog bone connection at the arm. I think I will have to get this to a bolt...

Wanted 1 Junk set or any 2 junk RZ or Banshee cylinders. need to have good reed boxes on them (prefer minimal porting)

The rest of the cylinder can be TOTAL JUNK...

FZR400/600 swingarm and late model R6 nearly NOS shock. The swingarm just needs a little cleaning VGC, including the linkage, Rear axle,chain pullers, caliper mount with linkage. R6 shock with reservoir, it has both rebound and compression adjustment and is virtually brand new. Link to a poject that...

Where are you in NE Florida? Jax here

I did this to the YZ465's when I was wrenching on 500cc national bikes, works quite nice. Getting an RZ into neutral is the big issue (race bike) I have the modified shift drums that have neutral at the top (GP shift) gets rid of that issue

Still available? Pics?

Beautiful bike, It is identical down to the rack out back to my first bike!!!

Stock springs are too soft, the mfg doesn't want to get dinged for a "harsh ride". If you get up to a good pace they will chatter you to the edge of the track if you don't get out of it or slow down. The rule of preload is if you should NEVER have more than 20mm of preload, I don't run mor...

I am interested in the cases, any chance of pics?

The bike in the picture is a hybrid, it has an RD350 LC engine cases which are a cross between the earlier motors (1973 - 1980) Both air-cooled and water-cooled and the YPVS motor. The transmission is the same as the earlier bike, the crank is a YPVS style. The motor mounts are the same as the YPVS/...