seat foam
Re: seat foam
Webike have them
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: seat foam
Webike japan?
Re: seat foam
These are pretty decent, I only used the foam though..
https://www.ebay.co.uk/itm/175622302127 ... R_bAnbKJYg
https://www.ebay.co.uk/itm/175622302127 ... R_bAnbKJYg
1985 RZv500
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1984 GPZ750 Turbo
1989 VFR750R RC30
1984 RZ500 Hybrid
1986 RG500 Walter Wolf
1986 RG500 Skoal Bandit
1984 RZ350
1984 RZ350 Hybrid
1981 RD350LC
1981 RD350LC Hybrid
2009 CR500AF Supermoto 250X
2007 CR500AF 250X
1988 YSR50 (2)
1984 GPZ750 Turbo
1989 VFR750R RC30
Re: seat foam
yes.
There was a place in the uk who does/did seat foams, P&K or something like that.
EDITED: I see Tacky listed a foam made by them.
Ive had the webike and the other one over the years, both ok.
80 XT500 Supermoto!
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
81 RD350LC Resto
82 RD421LC Hybrid
82 RD350LC decapitation project
82 RD250LC JDM '251LC' YPVS
83 RZ350 Resto
84 RZ500 Resto
85 RZ350 F1 Resto
86 RZ350 F2 Resto
86 RZ350 F2 Hybrid
Like Watches? www.PloProf.com & www.DeskDivers.com
Re: seat foam
I used universal foam available er everywhere.
Cut the original foam down with a straight cut, glue on the rectangular piece and then cut/grind the seat to the desired form.
I did that many times and when the cover is on, you don't recon it was DIY work.
Cut the original foam down with a straight cut, glue on the rectangular piece and then cut/grind the seat to the desired form.
I did that many times and when the cover is on, you don't recon it was DIY work.
Bye
Martin
Martin